VDI surface finish explained for mold texture and Ra callouts

What VDI surface finish means
VDI surface finish usually refers to the VDI 3400 mold texture scale, which is used to specify spark-eroded or EDM-style textures on mold cavities. A lower VDI number indicates a smoother surface. A higher number indicates a rougher matte or grain-like finish. In injection molding discussions, VDI 12 to VDI 45 is the common working range, from about Ra 0.40 µm to Ra 18 µm.
The important point is that VDI is not just an appearance label such as “matte” or “satin.” It is a roughness-based callout that should be linked to a measurable Ra value, an approved texture sample, and the exact surface where the texture is required.

For buyers, designers, mold makers, and quality teams, a VDI callout helps reduce ambiguity. It gives a shared language for molded part texture, tool finishing, inspection, and appearance risk. For more background on related finishing topics, see the surface finishes category.
How the VDI 3400 scale relates to Ra
VDI 3400 grades are commonly associated with arithmetic average roughness, written as Ra. Ra is the average absolute deviation of a measured surface profile from its mean line. In practical terms, it provides one numerical indication of surface roughness, but it does not fully define appearance. Two surfaces with the same Ra may still look different because of peak shape, lay, gloss, or texture pattern.
Engineering references commonly use the relationship VDI = 20 × log10(10 × Ra), with Ra expressed in micrometers. This is why the VDI scale rises in relatively small grade steps while actual roughness increases in a non-linear way. The difference between VDI 12 and VDI 15 is modest visually, while the difference between VDI 39 and VDI 42 represents a much larger roughness change.
The values below are practical comparison values. They should not replace the purchased standard, a calibrated reference plate, or an agreed inspection plan.
| VDI grade | Approx. Ra µm | Approx. Ra microinch | Typical appearance description |
|---|---|---|---|
| VDI 12 | 0.40 | 16 | Fine low-gloss surface |
| VDI 15 | 0.56 | 22 | Fine satin surface |
| VDI 18 | 0.80 | 32 | Soft satin or light matte |
| VDI 21 | 1.12 | 45 | Light matte texture |
| VDI 24 | 1.60 | 63 | General satin matte |
| VDI 27 | 2.24 | 88 | Noticeable matte texture |
| VDI 30 | 3.15 | 124 | Medium EDM matte |
| VDI 33 | 4.50 | 177 | Coarser textured matte |
| VDI 36 | 6.30 | 248 | Fine grain-like surface |
| VDI 39 | 9.00 | 354 | Medium grain-like surface |
| VDI 42 | 12.50 | 492 | Coarse grain-like surface |
| VDI 45 | 18.00 | 709 | Very coarse matte texture |
VDI surface finish is not the same as SPI or Mold-Tech
VDI, SPI, and proprietary texture systems often appear in the same mold finish discussion, but they do not define the same requirement. Treating them as interchangeable can produce a part that meets one specification while missing the intended visual result.
| System | Main purpose | How it is usually used | Important limitation |
|---|---|---|---|
| VDI 3400 | Roughness-based EDM-style texture reference | Calling out VDI grades such as VDI 24, VDI 27, or VDI 30 on molded faces | Does not fully define gloss, pattern shape, or decorative grain |
| SPI finish | Polishing and blasting finish categories | Specifying molded surface levels from high polish to dry blast | Often process-oriented and visual, with Ra values used as approximations |
| Proprietary texture systems | Decorative, tactile, or brand-specific grain patterns | Leather grain, stipple, geometric, etched, or laser textures | Usually requires supplier code, sample approval, and draft guidance |
A VDI surface finish is useful when the design intent is a controlled matte EDM texture. It is less suitable when the requirement is a decorative grain, a leather-like pattern, a logo-matched surface, or a consumer-facing texture where the pattern matters as much as roughness. In those cases, a texture supplier code and a physical plaque are usually more reliable than Ra alone.
Where VDI finishes are used in molded parts
VDI finishes are widely used on plastic injection molded components that need a controlled, non-polished appearance. Typical applications include equipment housings, internal covers, industrial handles, connector bodies, consumer product shells, and functional surfaces where glare reduction is helpful.
A moderate VDI grade can make minor handling marks, slight gloss variation, and subtle surface changes less noticeable than they would be on a highly polished finish. It does not remove molding defects. Sink marks, weld lines, flow hesitation, burns, and trapped gas can still show through a textured surface. Texture should therefore be treated as one part of design for manufacturability, not as a way to compensate for poor molding conditions.
Material selection also affects the final appearance. A VDI 27 surface molded in ABS, polypropylene, polycarbonate, and glass-filled nylon may not look identical. Resin shrinkage, filler content, gloss level, pigment, mold temperature, and packing conditions can all influence how the molded surface reflects light. Filled materials may reproduce texture differently because fibers or mineral fillers can affect the visible surface.
Design effects to consider before choosing a VDI grade
Draft angle and release
As surface roughness increases, ejection usually becomes more sensitive. A coarse texture can grip the molded part more than a polished cavity surface, especially on vertical walls. This is why textured surfaces often need more draft than smooth surfaces. There is no universal draft rule that fits every resin, wall height, grain depth, and mold direction. The safer approach is to confirm draft with the mold maker, texture supplier, and resin data before the design is frozen.
Parting lines, shutoffs, and local texture breaks
Texture should not be specified as a blanket note if only certain faces need it. Parting lines, shutoff faces, lifter areas, slides, ribs, bosses, and sealing surfaces may require different finishes. A VDI texture placed too close to a shutoff or sealing surface can create wear, flash sensitivity, or assembly issues. Drawings should separate cosmetic surfaces from functional surfaces and clearly show where the finish stops.
Measurement and acceptance
Ra measurement is useful, but it should not be the only acceptance method for cosmetic molded parts. A stylus profilometer measures a line profile, while the human eye judges area, gloss, contrast, and pattern consistency. For important surfaces, acceptance should combine a measurable roughness target with an agreed reference plaque, molded sample, or first-article approval. The inspection plan should also state whether measurement is taken on the steel cavity, the molded part, or both. See also: Buying Guides.
How to write a clear VDI callout on a drawing
A vague note such as “VDI finish” is not enough. It leaves the grade, location, inspection method, and visual standard open to interpretation. A stronger callout identifies the surface, VDI grade, approximate Ra value, and approval reference. If the finish is cosmetic, the note should also define whether acceptance is controlled by molded part appearance or tool surface measurement.
Useful callout elements include:
- Finish grade: for example, VDI 3400 Ref. 24 or VDI 27.
- Approximate roughness: for example, Ra about 1.6 µm for VDI 24.
- Surface location: identify the exact cavity faces, core faces, or visible part areas.
- Boundary condition: show where texture stops near edges, seals, logos, and parting lines.
- Approval method: define whether a reference plaque, molded sample, or measured value controls acceptance.
- Measurement condition: specify the inspection stage and whether the steel or molded surface is measured.
A practical drawing note might read: “Visible outer housing surfaces: VDI 3400 Ref. 27, approximate Ra 2.2 µm, non-directional matte texture. Texture boundaries as shown. Final cosmetic acceptance by approved molded sample.” This is clearer than a single finish word because it connects roughness, location, and visual approval.
Choosing a suitable VDI grade
The right VDI surface finish depends on function, appearance, resin, tooling process, and cost tolerance. Finer grades such as VDI 12 to VDI 18 are useful when the part needs a low-gloss surface without a strong tactile grain. Middle grades such as VDI 21 to VDI 30 are often selected for general matte molded surfaces. Coarser grades such as VDI 33 to VDI 45 should be used more carefully because they can increase release difficulty, emphasize texture mismatch, and require closer attention to draft.
For many projects, the decision starts with a basic question: is the finish mainly functional, cosmetic, or both? A functional finish may be chosen for grip, glare reduction, or controlled contact. A cosmetic finish may be chosen to create a consistent appearance across visible surfaces. When both are important, physical samples are especially valuable because Ra alone cannot predict the final look in a specific resin and color.
Avoid over-specification. Calling out a very fine or very coarse finish on every face can add unnecessary machining, polishing, texturing, or inspection work. Non-visible ribs, bosses, internal clips, and assembly features may not need the same finish as the outer shell. A well-prepared drawing reserves tight finish requirements for surfaces where they affect performance or appearance.
Frequently asked questions
Is VDI surface finish measured on the mold or on the molded part?
It can be measured on either, but the drawing or quality plan should state which one controls acceptance. Mold steel measurement is more direct for the tool finish. Molded part measurement reflects the customer-facing surface, but it can vary with resin, processing conditions, and part geometry.
Can a VDI grade be converted directly to SPI?
Only approximately. VDI grades describe roughness values commonly associated with EDM-style texture, while SPI categories are tied to polishing and blasting practices. Conversion charts can support communication, but they should not replace samples when appearance is critical.
Does a higher VDI number always mean a better texture?
No. A higher number means a rougher surface, not a better surface. The best choice is the grade that meets the part’s appearance, release, cleaning, grip, and manufacturing requirements.
Is Ra enough to define a cosmetic texture?
Usually not. Ra is an important roughness parameter, but it does not fully define gloss, direction, peak shape, or decorative pattern. Cosmetic textures should use samples, plaques, or supplier texture codes in addition to roughness information.
What is a safe starting range for general matte molded surfaces?
Many general matte molded surfaces fall in the middle of the VDI range, such as VDI 21 to VDI 30. This is only a starting point. The final choice should be checked against resin behavior, part geometry, draft, toolmaking method, and visual samples.


